Need to install some push pole holders for a Scout Costa 170 I just purchased. Any advice on type or who could install them would be helpful. Thanks
Hot Reels
2300 Century
12’ & 14’ Freedom Hawk Kayaks
http://www.freedomhawkkayaks.com/download/FHK_2010.Brochure.pdf
Stand up and Fish!
http://www.skinnyanglersgear.com/push_pole_brackets im about to buy the snagfree brackets found here… Check them out
“My fish served a whole lunchon. Your fish look like a munchkin”
167 Ranger Cayman
Yamaha 115
“Hydrophilic”
2007 Toyota Tundra TRD 5.7L V8
GO PIRATES!
Just make sure you get enough “bend” so that it’s snug. The factory placement of the push pole holders on my buddies Costa leaves it too loose and it pops out in rough water
These are a proven winner and what is on my boat: http://www.acconmarine.com/pc-44-15-push-pole-holder.aspx
dont break the bank. go to the angler or haddrells and get the regular push pole holders. accon is a rip off unless u can find a deal. i have flush mounts like that but paid 5$ a piece. and the stiffy ones are lifetime replacement if they break. (i think)
ft worry.
I want some flush mounts, but I’m afraid to cut into the hull myself. Idea’s on who can install them?
Hot Reels
2300 Century
12’ & 14’ Freedom Hawk Kayaks
http://www.freedomhawkkayaks.com/download/FHK_2010.Brochure.pdf
Stand up and Fish!
Sunbird,
I’ve got the Costa 190 that has flush mount PP holders. I’m not sure how you’re going to attach them because the factory installed holders were added before they put on the topcap. That being said I did replace one of mine that broke by drilling out the bolt heads and knocking the cut bolt/nut into the hull bottom and filling the hole with marinetec then tapped new threads and used 5200. This seems to be solid as the through bolted installed. I’d call Scout and get the manu. and order from them. I wouldn’t be scared to do it yourself. If you’re in Bft. I can assist.